Things You Should Know About Bull Bars

Someone who likes to pick up off-road trips would have heard about bull bars. They are an important addition to your vehicle, as it adds a protective layer to your vehicle. Although they are an important addition to the vehicle, there are certain apprehensions surrounding usability. In certain cases, these bars have proven to be fatal.

In this blog, we try to answer all the questions related to bull bars and their installation.

What Is A Bull Bar?

A bull bar is attached at the front of the vehicle to prevent any accidental collision. It is considered an integral piece of safety equipment, and hence most Australian motorists prefer it for their vehicles.  These are made from plastic, steel, or aluminum based on the car and the requirement. Of these, aluminum and steel are considered to be the sturdiest of the options. Steel bull bars put a huge extra load on the suspension and front axle. Motorists then start looking for other alternatives, like the aluminum bull bars. The latter were light in weight and are sturdy and hence is a popular choice now.

Key Points To Consider When Installing Bull Bars

  • The first thing that you need to consider is whether or not you need these bars. If you regularly travel to areas where animals strike or you are planning an off-road trip, then you must install these.
  • Choose an environment-friendly bull bar rather than choosing an aggressively designed bull bar. This should not disturb the environment around by emitting substances.
  • It’s always good to use a lightweight material rather than the ones that put extra load on your vehicle. You need to choose a sturdy material as lightweight ones are also strong.
  • The mounting points decide the strength of the bull bar on the vehicle where it is added.
  • You also need to stick to the legal compliances with the bull bar installation.
  • Make sure that when you are buying a bull bar, it should be certified and should not clash with the Australian Design Rules and vehicle standards. Also, you can find manufacturers who provide a certificate that assures that the bull bar won’t impact the crashworthiness.
  • Beware of the dealers who sell car accessories that are not approved. Hence, you must always check the accreditation and license of the car accessories seller.

JeepLiberty

Legal Requirements For Bull Bars

As we have mentioned above, there are certain legal implications that one needs to adhere to if they want to install a bull bar. You cannot neglect those terms.

Here are a few of them:

  • The design of the bull bar should be such that it doesn’t impact the safety of the vehicle.
  • The vehicles that are manufactured to comply with Australian Design Rules 69 and/or 73, the bull bars should.
  • 4WD vehicles have a limited front axle load capacity, and so when you add a bar, the load should not exceed the legal axle loading. This becomes especially important if you are installing a heavily constructed bull bar.
  • The bull bar manufacturer should show that it doesn’t affect the critical airbag timing, or it should not adversely affect the ADRs’ compliance.
  • It should not hinder the vision of the driver or the viewing angles of lights. In case the lights get affected, then additional lights must be added.
  • The bull bar must be fitted securely and should not protect further from the front of the vehicle than the required attachment.
  • It should be designed to reduce the probability of injury to the pedestrians, and external protrusion should not be sharp.

SUV bull bar Land Rover Ice

This was the basic information about bull bars and their uses. If you are also planning to install one, you must get only a certified bull bar from a licensed seller. They will be providing you with the best service in no time. All you have to do is keep a note of the renowned seller near you.

The post Things You Should Know About Bull Bars appeared first on Sunshine Slate.



source https://www.sunshineslate.com/autos/things-you-should-know-about-bull-bars/

Comments

Post a Comment

Popular posts from this blog

How can Energy Audits inform your Net Zero Strategy?

Image
Many organisations are already in the habit of undertaking energy audits to highlight where energy and water efficiencies can be made, save on utility costs, and reduce carbon emissions. Unfortunately, the sad reality of many energy audits and surveys (especially ones that are completed for compliance with ESOS), is that once they are completed, the report is often tucked away into a ‘virtual’ drawer, never to be seen again. But what if there was another use for that forgotten energy audit? Did you know that it could actually be a really useful business tool to help get you started on your net zero journey? To help you harness that data in a practical way, Energy Services Analyst, Rhiannon Farquhar explains what makes energy audits so essential to carbon management and how they can be used to get your business on the path to net zero. So, what are energy audits? To put it simply, an energy audit is an assessment of the energy needs and efficiency of a building (or process), which
Read more

Garden Offices | The Ultimate Work from Home Solution for 2021

Image
The Pros and Cons of Working from Home Working from home was not so long ago considered a perk of the job, however, the much-longed-for 30-second commute, for many of us, has finally become a realisation. Prior to the global pandemic, we would have spent 492 days of our lives commuting to and from work and inevitably, Covid-19 has brought about a catalyst of change. Businesses are now seeing the benefits of reducing costs by giving up office spaces, and with commuting now significantly reduced, one of the biggest winners out of this situation is the environment. With this in mind, there’s no doubt that the “new normal” of home working is, quite clearly, here to stay. The general consensus is that working from home is wholly positive and can provide a better work-life balance. Whilst this is true, there is evidence to suggest that this can be quite the opposite, with staff working later than usual as they battle to “switch-off” when their working day is over. So, what’s the solutio
Read more

Forgiveness Plan Would Remove One-Third of Students’ Loan Debt

Image
About one in three Idahoans who have federal student-loan debt would see it erased entirely if the Biden administration goes forward with a $10,000 forgiveness plan. That’s according to analysis from the website Student Loan Hero . President Joe Biden is considering eliminating the debt through executive order. Andrew Pentis, a senior writer and certified student loan counselor at Student Loan Hero, said the average monthly loan repayment in Idaho is $274. “Whether you have more or less than $10,000 worth of student loans left to repay, this dose of forgiveness would be hugely helpful, in either getting rid of your debt or shrinking it considerably,” said Pentis. “So certainly, if you’re a borrower in Idaho, you’d be rooting for something like this to happen.” The Trump administration paused federal student loan repayments in March 2020 during the pandemic. Biden extended the pause on his first day in office through at least October 1. Some Democrats want the Biden administration
Read more